LISTENING TO: IKIMfm
IKIMfm
Pilihan Utama Anda

Live Online Trends

Friday, January 14, 2011

The Periodic Table of Gold And Silver Returns

Natural resources are the building blocks of the world, essential to progress and prosperity. These commodities, like all investments, can have wide price fluctuations over time. This table shows the ebb and flow of commodity prices over the past decade and illustrates the principal of mean reversion—the concept that returns eventually move back towards their mean or average. The price movement of commodities is historically both seasonal and cyclical. That’s why when investing in natural resources, we believe it is important for your portfolio to hold a diversified basket of commodities and to be actively managed by professionals who understand these specialized assets and the global trends impacting them. As with all investments, diversification does not protect an investor from market risks and does not assure a profit, and of course, past performance does not guarantee future results.
The Gold Performance and Returns

The Silver Performance and Returns

Sources: Bloomberg and U.S. Global Investors Research. Returns are based on historical spot prices of futures prices.

Outlook 2011: Fear and Love in Gold Trading

Wall Street has been calling gold a bubble since 2005 when it hit $500. Some media naysayers remained negative even as they wrote the headlines proclaiming record highs and saw gold rise almost 30 percent in the past 12 months.

Interestingly, despite gold’s latest run, it was still a laggard compared to many other commodities. In the commodity world, gold didn’t even place in the top half in 2010. Against a basket of 14 commodities that includes everything from aluminum to wheat, gold’s 29.52 percent return places it eighth. Palladium took the top spot with a 96.6 percent return, followed by silver with an 83.21 percent return. Natural gas continued its cellar-dwelling ways, dropping 21.28 percent to become the worst-performing commodity of the basket.

There are two main drivers of gold demand: The Fear Trade and the Love Trade.

Fear Trade: The fear trade is what you often hear about from the media and the gloom-and-doomers. The fear trade is driven by negative real interest rates—where inflation is greater than the nominal interest rate—and deficit spending. Whenever you have negative real interest rates coupled with increased deficit spending, gold tends to rise in that country’s currency.

In the U.S., we’re in the middle of an extended period of negative real interest rates that will likely last through the year. The Federal Reserve is acutely aware that if interest rates should spike, it would be catastrophic for the economic recovery.

Looking back over the past 400 years, there has been a major currency or credit crisis every decade and, historically, it takes approximately four years to heal from the contraction. The U.S. economy is on the road to recovery, however the elevated number of home foreclosures and high unemployment make it unlikely the Fed will risk a relapse by raising interest rates any time soon. The government is also unlikely to cut spending or welfare support during the healing process.

As for deficit spending, we still have an oversized government, creating regulatory traffic jams for business development and hurdles for economic trade.

Love Trade: The love trade is significant and unique to gold. People buy gold out of love and those in emerging markets are especially amorous of the metal. We refer to the most populous seven of the emerging economies as the E-7. Currently, the E-7 countries hold nearly half of the world’s population but make up less than 20 percent of global GDP. The G-7 industrialized nations are a mirror of this; they host 11 percent of the world’s population but control more than 50 percent of the global economy.

But things are changing.

I’ve discussed this many times but it’s important to grasp how today’s world looks a lot different than yesterday’s. Many of these emerging economies are averaging over 6 percent GDP growth and personal incomes are rising around 8 percent. In addition, emerging economies are home to 27 percent of the world’s purchasing power, according to economic research firm ISI.

It is customary in most emerging countries to give gold as a gift to friends and relatives for birthdays, weddings, and to celebrate religious holidays.

In December, the Shanghai Gold Exchange reported that China imported five times more gold in 2010 than 2009 and that was just during the first 10 months of the year. In India, spending on gold rose 100 percent on a year-over-year basis through September, according to Morgan Stanley. Russia’s central bank holdings of gold rose 7 percent in 2010.

What is important to remember when looking at the history of gold is that in the 1970s, China, India and Russia were isolationists with no significant global economic footprint. The world’s population was 3 billion and today we have witnessed an awakening of epic proportions.

These countries are growing with free market policies and massive infrastructure spending. In the 1970s, gold rose on the fear trade and the cold war. Today the world is significantly different and the love trade drives gold.

If QE2 was the fuel that sent gold prices to the moon, the gold holiday season was the vehicle they rode in. Gold prices rose steadily as Ramadan came early, which then carried into the Diwali season of lights in India. Then came Christmas, with shoppers around the world spending more than they had in years.

Next is the Chinese New Year—the Year of the Rabbit—on February 3. It’s believed that people born in the Year of the Rabbit are wise, financially lucky and have a gift for making the right decision—similar to how gold investors are feeling these days.

Looking Ahead

It’s impossible to predict where gold prices will be 12 months from now but we think gold prices could double over the next five years. This would mean roughly a 15 percent return, if you compounded it annually.

However, it will by no means be a straight line. Volatility is always inherent in commodity investing. It’s a non-event for gold to go up or down 15 percent in a year—this happens 68 percent of the time. For gold stocks, the volatility is even more dramatic—plus or minus 40 percent, historically.

We have always suggested that investors consider a 10 percent weight in gold funds and rebalance their portfolio each year to capture the volatility and not chase return. Since gold was up almost 30 percent last year, it could easily correct from its peak by 10 to 15 percent. This is why we believe gold stock investors need to be active, not passive, when it comes to managing portfolios.

Investors looking to either add to or initiate new positions in gold must be aware of this volatility and use it their advantage. Use sharp selloffs as cheap entry points and make sure to rebalance those portfolios in order to lock in profits from 2010’s big gains.

By Frank Holmes as Jan 10 2011 9:48AM
CEO and Chief Investment Officer
U.S. Global Investors

Sunday, January 9, 2011

Where Next? With gold well into record territory, investor enthusiasm is boiling over.

There is a wide range of opinions on the outlook for metals, reflecting the uncertainty in nearly all of the variables that impact metal prices.

The sovereign debt and worries and fears of a double dip recession still cloud the outlook for some investors. Another round of quantitative easing will inject another $600 billion into the global money supply. The announcement of QE2 built confidence that the American economy will remain in positive territory. It also re-ignited inflation concerns, pushing gold to a further record high.

Investors were already buying gold for its safe-haven status. The gold market enjoyed a further boost as investors seek cover from looming inflation (read “currency devaluation”).

The high price of bullion has attracted a significant amount of media attention and drawn in a great many investors who might not otherwise be investing in gold. Many gold companies have followed gold higher: certainly, the big producers and the better-known among the developers and explorers have enjoyed big gains.

As the present gold rush is driven largely by investors seeking safety, the majors and the mid-tier producers trade at premium prices. An inordinately large discount is applied to the next level down. A development-stage gold company clearly carries more risk than an established producer. The flip side is that the developers and advanced explorers offer a great deal more upside. The higher potential rewards arise in part from the higher leverage to the gold price offered by the smaller companies. A second benefit is that select companies will appreciate in value as their projects evolve toward production.

Gold is capturing the headlines, but other aspects of the mining industry deserve a share of the attention. North American and European investors continue to shun the base metal juniors for fear of further economic slowdowns. Those investors seem to have missed copper’s stealth march toward its previous record highs. Tin is now at an all-time record high. Other metals have also moved higher. That strength in the base metal markets is being propelled by demand from the developing world. The Asian mining companies are scouring the planet in search of metal deposits on which to develop new mines. The takeover activity is set to accelerate and to become far more visible.

The United States government continues its efforts to push down the value of the dollar. On one level, a cheaper dollar would benefit American exporters. Secondly, devaluing the currency reduces the real value of the multi-trillion dollar debt owing to foreigners. Of course, downward pressure on the dollar is quickly matched by other nations seeking to keep their export industries competitive.

On any given day, pundits could put together a string of headlines to support a case for any direction for any of the metals. Instead of simply speculating on metal prices, investors can instead put their money into companies that are adding value for shareholders. The gains from successfully executing mineral development projects far exceed any realistic outlook for moves in metal prices.

Lawrence Roulston

-----------------------------------

More Commentaries







Wednesday, January 5, 2011

Daily Analytical Charts for Gold, Silver and Platinum and Palladium

Due to popular demand, we have added Palladium to the list of Analytical Charts that Metals Analyst Jim Wyckoff features.

The Bollinger Bands (B-Bands) technical study was created by John Bollinger, the president of Bollinger Capital Management Inc., based in Manhattan Beach, California. Bollinger is well respected in the futures and equities industries.

Traders generally use B-Bands to determine overbought and oversold zones, to confirm divergences between prices and other technical indicators, and to project price targets. The wider the B-bands on a chart, the greater the market volatility; the narrower the bands, the less market volatility.

B-Bands are lines plotted on a chart at an interval around a moving average. They consist of a moving average and two standard deviations charted as one line above and one line below the moving average. The line above is two standard deviations added to the moving average. The line below is two standard deviations subtracted from the moving average.

Some traders use B-Bands in conjunction with another indicator, such as the Relative Strength Index (RSI). If the market price touches the upper B-band and the RSI does not confirm the upward move (i.e. there is divergence between the indicators), a sell signal is generated. If the indicator confirms the upward move, no sell signal is generated, and in fact, a buy signal may be indicated.

If the price touches the lower B-band and the RSI does not confirm the downward move, a buy signal is generated. If the indicator confirms the downward move, no buy signal is generated, and in fact, a sell signal may be indicated.

Another strategy uses the Bollinger Bands without another indicator. In this approach, a chart top occurring above the upper band followed by a top below the upper band generates a sell signal. Likewise, a chart bottom occurring below the lower band followed by a bottom above the lower band generates a buy signal.

B-Bands also help determine overbought and oversold markets. When prices move closer to the upper band, the market is becoming overbought, and as the prices move closer to the lower band, the market is becoming oversold.

Importantly, the market’s price momentum should also be taken into account. When a market enters an overbought or oversold area, it may become even more so before it reverses. You should always look for evidence of price weakening or strengthening before anticipating a market reversal.

Bollinger Bands can be applied to any type of chart, although this indicator works best with daily and weekly charts. When applied to a weekly chart, the Bands carry more significance for long-term market changes. John Bollinger says periods of less than 10 days do not work well for B-Bands. He says that the optimal period is 20 or 21 days.

Like most computer-generated technical indicators, I use B-Bands as mostly an indicator of overbought and oversold conditions, or for divergence--but not as a specific generator of buy and sell signals for my trading opportunities. It's just one more "secondary" trading tool, as opposed to my "primary" trading tools that include chart patterns and trend lines and fundamental analysis.

The Moving Average Convergence Divergence (MACD) indicator has the past few years become one of the more popular computer-generated technical indicators.

The MACD, developed by Gerald Appel, is both a trend follower and a market momentum indicator (an oscillator). The MACD is the difference between a fast exponential moving average and a slow exponential moving average. An exponential moving average is a weighted moving average that usually assigns a greater weight to more recent price action.

The name “Moving Average Convergence Divergence” originated from the fact that the fast exponential moving average is continually converging toward or diverging away from the slow exponential moving average. A third, dotted exponential moving average of the MACD (the "trigger" or the signal line) is then plotted on top of the MACD.

Parameters:

Mov1: The time period for the first exponential moving average. The default value is usually 12, referring to 12 bars of whatever timeframe plotted on the chart. (This is the fast moving average.)

Mov2: The time period for the subtracted exponential moving average. The default value is usually 26, referring to 26 bars. (This is the slow moving average.)

Trigger: The period of 9 bars for the signal line representing an additional exponential moving average.

(Note: For a graphic example of the MACD indicator, send me an email at jim@jimwyckoff.com and I will email you back with the picture example.)

The MACD study can be interpreted like any other trend-following analysis: One line crossing another indicates either a buy or sell signal. When the MACD crosses above the signal line, an uptrend may be starting, suggesting a buy. Conversely, the crossing below the signal line may indicate a downtrend and a sell signal. The crossover signals are more reliable when applied to weekly charts, though this indicator may be applied to daily charts for short-term trading.

The MACD can signal overbought and oversold trends, if analyzed as an oscillator that fluctuates above and below a zero line. The market is oversold (buy signal) when both lines are below zero, and it is overbought (sell signal) when the two lines are above the zero line.

The MACD can also help identify divergences between the indicator and price activity, which may signal trend reversals or trend losing momentum. A bearish divergence occurs when the MACD is making new lows while prices fail to reach new lows. This can be an early signal of a downtrend losing momentum. A bullish divergence occurs when the MACD is making new highs while prices fail to reach new highs. Both of these signals are most serious when they occur at relatively overbought/oversold levels. Weekly charts are more reliable than daily for divergence analysis with the MACD indicator.

For more details on the MACD, Appel has a book in print, entitled: "The Moving Average Convergence-Divergence Trading Method."

As with most other computer-generated technical indicators, the MACD is a "secondary" indicator in my trading toolbox. It is not as important as my "primary" technical indicators, such as trend lines, chart gaps, chart patterns and fundamental analysis. I use the MACD to help me confirm signals that my primary indicators may be sending.

That's it for now. Next time, we'll examine another important topic on your road to increased trading success.

I take a “toolbox” approach to analyzing and trading markets. The more technical and analytical tools I have in my trading toolbox at my disposal, the better my chances for success in trading. One of my favorite "secondary" trading tools is moving averages. First, let me give you an explanation of moving averages, and then I’ll tell you how I use them.

Moving averages are one of the most commonly used technical tools. In a simple moving average, the mathematical median of the underlying price is calculated over an observation period. Prices (usually closing prices) over this period are added and then divided by the total number of time periods. Every day of the observation period is given the same weighting in simple moving averages. Some moving averages give greater weight to more recent prices in the observation period. These are called exponential or weighted moving averages. In this educational feature, I’ll only discuss simple moving averages.

The length of time (the number of bars) calculated in a moving average is very important. Moving averages with shorter time periods normally fluctuate and are likely to give more trading signals. Slower moving averages use longer time periods and display a smoother moving average. The slower averages, however, may be too slow to enable you to establish a long or short position effectively.

Moving averages follow the trend while smoothing the price movement. The simple moving average is most commonly combined with other simple moving averages to indicate buy and sell signals. Some traders use three moving averages. Their lengths typically consist of short, intermediate, and long-term moving averages. A commonly used system in futures trading is 4-, 9-, and 18-period moving averages. Keep in mind a time interval may be ticks, minutes, days, weeks, or even months. Typically, moving averages are used in the shorter time periods, and not on the longer-term weekly and monthly bar charts.

The normal moving average “crossover” buy/sell signals are as follows: A buy signal is produced when the shorter-term average crosses from below to above the longer-term average. Conversely, a sell signal is issued when the shorter-term average crosses from above to below the longer-term average.

Another trading approach is to use closing prices with the moving averages. When the closing price is above the moving average, maintain a long position. If the closing price falls below the moving average, liquidate any long position and establish a short position.

Here is the important caveat about using moving averages when trading futures markets: They do not work well in choppy or non-trending markets. You can develop a severe case of whiplash using moving averages in choppy, sideways markets. Conversely, in trending markets, moving averages can work very well.

In futures markets, my favorite moving averages are the 9- and 18-day. I have also used the 4-, 9- and 18-day moving averages on occasion.

When looking at a daily bar chart, you can plot different moving averages (provided you have the proper charting software) and immediately see if they have worked well at providing buy and sell signals during the past few months of price history on the chart.

I said I like the 9-day and 18-day moving averages for futures markets. For individual stocks, I have used (and other successful veterans have told me they use) the 100-day moving average to determine if a stock is bullish or bearish. If the stock is above the 100-day moving average, it is bullish. If the stock is below the 100-day moving average, it is bearish. I also use the 100-day moving average to gauge the health of stock index futures markets.

One more bit of sage advice: A veteran market watcher told me the “commodity funds” (the big trading funds that many times seem to dominate futures market trading) follow the 40-day moving average very closely--especially in the grain futures. Thus, if you see a market that is getting ready to cross above or below the 40-day moving average, it just may be that the funds could become more active.

I said earlier that simple moving averages are a "secondary" tool in my trading toolbox. My primary (most important) tools are basic chart patterns, trend lines and fundamental analysis.

One of the more popular computer-generated technical indicators is the Relative Strength Index (RSI) oscillator. (An oscillator, defined in market terms, is a technical study that attempts to measure market price momentum—such as a market being overbought or oversold.)

I’ll define and briefly discuss the RSI, and then I’ll tell you how I use it in my market analysis and trading decisions.

The Relative Strength Index (RSI ) is a J. Welles Wilder, Jr. trading tool. The main purpose of the study is to measure the market's strength or weakness. A high RSI, above 70, suggests an overbought or weakening bull market. Conversely, a low RSI, below 30, implies an oversold market or dying bear market. While you can use the RSI as an overbought and oversold indicator, it works best when a failure swing occurs between the RSI and market prices. For example, the market makes new highs after a bull market setback, but the RSI fails to exceed its previous highs.

Another use of the RSI is divergence. Market prices continue to move higher/lower while the RSI fails to move higher/lower during the same time period. Divergence may occur in a few trading intervals, but true divergence usually requires a lengthy time frame, perhaps as much as 20 to 60 trading intervals.

Selling when the RSI is above 70 or buying when the RSI is below 30 can be an expensive trading system. A move to those levels is a signal that market conditions are ripe for a market top or bottom. But it does not, in itself, indicate a top or a bottom. A failure swing or divergence accompanies the best trading signals.

The RSI exhibits chart formations as well. Common bar chart formations readily appear on the RSI study. They are trendlines, head and shoulders, and double tops and bottoms. In addition, the study can highlight support and resistance zones.

How I employ the RSI

As you just read above, some traders use these oscillators to generate buy and sell signals in markets-—and even as an overall trading system. However, I treat the RSI as just one trading tool in my trading toolbox. I use it in certain situations, but only as a “secondary” tool. I tend to use most computer-generated technical indicators as secondary tools when I am analyzing a market or considering a trade. My “primary” trading tools include chart patterns, fundamental analysis and trend lines.

Oscillators tend not to work well in markets that are in a strong trend. They can show a market at either an overbought or oversold reading, while the market continues to trend strongly. Another example of oscillators not working well is when a market trades into the upper boundary of a congestion area on the chart and then breaks out on the upside of the congestion area. At that point, it’s likely that an oscillator such as the RSI would show the market as being overbought and possibly generate a sell signal—when in fact, the market is just beginning to show its real upside power.

I do look at oscillators when a market has been in a decent trend for a period of time, but not an overly strong trend. I can pretty much tell by looking at a bar chart if a market is “extended” (overbought or oversold), but will employ the RSI to confirm my thinking. I also like to look at the oscillators when a market has been in a longer-term downtrend. If the readings are extreme-—say a reading of 10 or below on the RSI-—that is a good signal the market is well oversold and could be due for at least an upside correction. However, I still would not use an oscillator, under this circumstance, to enter a long-side trade in straight futures, as that would be trying to bottom-pick.

Oscillators are not perfect and are certainly not the “Holy Grail” that some traders continually seek. However, the RSI is a useful tool to employ under certain market conditions.

---------

Thank Jim and Kitco News. I backup here.